5kWh 51.2V 100Ah Stack Mounted Energy Storage Lithium Battery For Residential
YH-ESS-BP100S16-MP&S-F stacked home storage system mainly includes battery modules, BMS modules, inverters, output interfaces, etc. It can store and release electric energy according to the requirements of the AC/DC inverter system, and supports the expansion of multi-module capacity . Combined with photovoltaics to form a household photovoltaic storage system, in one under the control of the body machine, the excess photovoltaic energy is stored in the battery, and when the photovoltaic energy is insufficient, the stored electricity is released to supply power to the load.
Features
1. Modular design, easy installation
Modular stacking design, convenient for users to install and use
2. Ultra-high protection, safe and worry-free
IP65 protection level, calmly cope with outdoor environment
3. Multi-mode seamless switching
There are 4 charging modes to choose from: solar only, mains priority, solar priority, hybrid charging
4. Uninterrupted power supply throughout the day
It has two output modes of mains bypass and inverter output, and has the function of uninterrupted power supply throughout the day
5. Support multiple parallel machines
Meet the needs of various household electrical conditions
6. Remote monitoring, keep an eye on
User-friendly design of the management platform, mobile phones and computers can log in freely to view real-time working status
7. Smart home energy management
Intelligently configure energy storage charging and discharging strategies according to electricity consumption habits, peak and valley electricity prices, and safety indicators to maximize comprehensive value
| No. | Item | Specifications |
| 1 | Cell | LiFeCoPO4 3.2V/50Ah |
| 2 | Number of modules | 1 |
| 3 | Picture | 
|
| 4 | Batteries configuration | 16S1 |
| 5 | Rated capacity | 100Ah |
| 6 | Available capacity | 5.12kWh |
| 7 | Weight(Kg) | 55kg |
| 8 | Dimensions(L×W×H)
(mm) | 675×375×400 |
| 9 | Rated voltage | 51.2V |
| 10 | Resistance | IR≤0.6mΩ |
| 11 | Charge voltage | 58.4V |
| 12 | Discharge cut-off voltage | 40V |
| 13 | Standard charging current | 0.25C |
| 14 | Standard discharging current | 0.5C |
| 15 | Max continuous discharge current | 1C |
| 16 | Communication interface | RS485 |
| 17 | Light | ALM / RUN / SOC |
| 18 | Cycle Life | 5000 cycles
(0.2C3 charge, 0.2C3 discharge, capacity) |
| 19 | Operating temperature | charging:0℃~55℃ ;
discharging:-10℃~55℃ |
| 20 | Storage temperature | 1 month: -20℃~45℃
1 year:0℃~35℃ |
| 22 | Relative Humidity | 65±20% |
| 23 | Delivery voltage | ≥48V |
| 24 |
Charge retention and capacity
recovery capability | After standard charging of the battery, it is shelved at room
temperature for 28d or 55°C for 7d, the charge retention rate is ≥90%,
and the capacity recovery rate is ≥90% |
Operating mode
The figure below shows the system application scenario of this product. A complete system includes the following parts:
1. Photovoltaic module: convert light energy into DC power, charge the battery through the all-in-one machine, or directly invert it into AC power to supply power to the load.
2. Mains power or generator: connected to the AC input terminal, it can supply power to the load and charge the battery at the same time. If not connected to mains
Or a generator, the system can also operate normally, and the load power supply is provided by batteries and photovoltaic modules at this time.
3. Battery module: The function of the battery module is to ensure the normal power consumption of the system load when the solar energy is insufficient and there is no mains power.
4. Household loads: It can be connected to various household and office loads, including AC loads such as refrigerators, lamps, TVs, fans, and air conditioners.
5. Inverter control integrated machine: the energy conversion device of the whole system.
6. The specific system wiring method is determined by the actual application scenario.
FQA
1. How to choose a BMS battery?
In order to choose the best BMS for your lithium battery, you will need to know a little bit about the functions that a BMS provides. Overcurrent Protection, Undervoltage Protection, Overvoltage Protection, Cell Balancing, Connectivity Features, Temperature Monitoring ...
2. What voltage is a BMS battery?
These systems may have a voltage rating of less than 100V, but could be as high as 800V, with pack supply currents ranging as high as 300A or more.
3. What size BMS do I need?
A BMS with enough cell taps for each cell in series is required. If you have a battery pack with 100 cells total with 50 in series (and 2 in parallel) at each level, then you would need a BMS with at least 50 cells.
4. Does BMS prevent overcharging?
The Battery Management System (BMS) protects not just from overcharging, but also from over-discharge as well. When the battery capacity is at a dangerous low voltage, the BMS disconnects it, avoiding any further power draw from the battery.
Product Tags:
|
|
5kWh Residential Lithium Battery Pack 51.2V 100Ah Stack Mounted Energy Storage Images
|
