10kWh 200Ah 51.2V Large Capacity Stacked Home Battery System For Solar System
YH-ESS-BP200S16-MP&S-F stacked home storage system mainly includes battery modules, BMS modules, inverters, output interfaces, etc. It can store and release electric energy according to the requirements of the AC/DC inverter system, and supports the expansion of multi-module capacity . Combined with photovoltaics to form a household photovoltaic storage system, in one under the control of the body machine, the excess photovoltaic energy is stored in the battery, and when the photovoltaic energy is insufficient, the stored electricity is released to supply power to the load.
Features
1. Modular design, easy installation
Modular stacking design, convenient for users to install and use
2. Ultra-high protection, safe and worry-free
IP65 protection level, calmly cope with outdoor environment
3. Multi-mode seamless switching
There are 4 charging modes to choose from: solar only, mains priority, solar priority, hybrid charging
4. Uninterrupted power supply throughout the day
It has two output modes of mains bypass and inverter output, and has the function of uninterrupted power supply throughout the day
5. Support multiple parallel machines
Meet the needs of various household electrical conditions
6. Remote monitoring, keep an eye on
User-friendly design of the management platform, mobile phones and computers can log in freely to view real-time working status
7. Smart home energy management
Intelligently configure energy storage charging and discharging strategies according to electricity consumption habits, peak and valley electricity prices, and safety indicators to maximize comprehensive value
| No. | Item | Specifications |
| 1 | Cell | LiFeCoPO4 3.2V/50Ah |
| 2 | Number of modules | 2 |
| 3 | Picture | 
|
| 4 | Batteries configuration | 16S2P |
| 5 | Rated capacity | 200ah |
| 6 | Available capacity | 10.24kWh |
| 7 | Weight(Kg) | 95kg |
| 8 | Dimensions(L×W×H)
(mm) | 675×375×560 |
| 9 | Rated voltage | 51.2V |
| 10 | Resistance | IR≤0.6mΩ |
| 11 | Charge voltage | 58.4V |
| 12 | Discharge cut-off voltage | 40V |
| 13 | Standard charging current | 0.25C |
| 14 | Standard discharging current | 0.5C |
| 15 | Max continuous discharge current | 1C |
| 16 | Communication interface | RS485 |
| 17 | Light | ALM / RUN / SOC |
| 18 | Cycle Life | 5000 cycles
(0.2C3 charge, 0.2C3 discharge, capacity) |
| 19 | Operating temperature | charging:0℃~55℃ ;
discharging:-10℃~55℃ |
| 20 | Storage temperature | 1 month: -20℃~45℃
1 year:0℃~35℃ |
| 22 | Relative Humidity | 65±20% |
| 23 | Delivery voltage | ≥48V |
| 24 |
Charge retention and capacity
recovery capability | After standard charging of the battery, it is shelved at room
temperature for 28d or 55°C for 7d, the charge retention rate is ≥90%,
and the capacity recovery rate is ≥90% |
Operating mode
The figure below shows the system application scenario of this product. A complete system includes the following parts:
1. Photovoltaic module: convert light energy into DC power, charge the battery through the all-in-one machine, or directly invert it into AC power to supply power to the load.
2. Mains power or generator: connected to the AC input terminal, it can supply power to the load and charge the battery at the same time. If not connected to mains
Or a generator, the system can also operate normally, and the load power supply is provided by batteries and photovoltaic modules at this time.
3. Battery module: The function of the battery module is to ensure the normal power consumption of the system load when the solar energy is insufficient and there is no mains power.
4. Household loads: It can be connected to various household and office loads, including AC loads such as refrigerators, lamps, TVs, fans, and air conditioners.
5. Inverter control integrated machine: the energy conversion device of the whole system.
6. The specific system wiring method is determined by the actual application scenario.
FQA
1. How long will a 10kW battery power my house?
Residential. In case of power outages, the 10kwh Battery Pack can power your home for about 8 hours on average 1kWh / hr for 8 hrs Combine the 10kWh Battery Pack with solar or use independently to provide your home with power both day & night.
2. How many kWh can a home battery hold?
Home battery capacity. Battery storage capacity is measured in kilowatt hours (kWh) and can vary from as little as 1 kWh to over 10 kWh. Multiple batteries can be combined together to add even more capacity, but a 10 kWh home battery is typical for most homes.
3. Are home battery backups worth it?
Across most categories, battery backup systems come out on top. In short, they're better for the environment, easier to install and cheaper to run long-term. Plus, they have longer warranties than standby generators.
4. Is it worth installing a home battery?
The benefits of a home battery. If you generate your own electricity, the battery will allow you to use an average of 60% to 80% of your own electricity. Without a battery, you will only get 30% - 50%.
Product Tags:
|
|
51.2V 200Ah 10kWh Stacked Battery Pack Large Capacity Home Battery System Images
|
